====== ArbOS basic command ======

===== Command Tree =====
  ip/              IP and network configuration
    access/          IP access rules
    arp/             ARP configuration
    interfaces/      Network interface configuration
  route/           Routing configuration
  tee/             NetFlow tee rules
  services/        System services
    aaa/             Configure authentication, authorization, and accounting
    aps/             Configure Pravail APS
    dns/             DNS service configuration
    http/            HTTP service configuration
    logging/         Configure logging services
    ntp/             Configure the network time protocol service
    snmp/            SNMP service configuration
    ssh/             SSH service configuration
    telnet/          Telnet service configuration
    vrrp/            Configure the virtual router redundancy protocol service
  system/          System configuration

===== Basic command =====
  * config mgt0 ip<code cmd>admin@arbor:/#ip interfaces ifconfig mgt0 10.0.0.1/24 up</code>
  * show pravail aps deployment mode<code cmd>admin@arbor:/# services aps mode show</code>
  * set pravail deployment mode (active/inactive)<code cmd>admin@arbor:/# services aps mode set active
admin@arbor:/# services aps mode set inactive</code>
  * show pravail aps service status<code cmd>admin@arbor:/# services aps show</code>
  * show license<code cmd>admin@arbor:/# system license show</code>
  * set license(看機器上面的貼紙)<code cmd>admin@arbos:/# system license set Pravail PRA-APS-2108 AAAAA-AAAA8-AA544-484AA-AAAA8-AAAA6-AAAA3-AAAAA-A1AAA</code>
  * clear all config<code cmd>admin@arbor:/# services aps database initialize</code>
  * set mgt access list<code cmd>admin@arbor:/# ip access add https mgt0 172.16.0.0/12
admin@arbor:/# ip access add ssh mgt0 172.16.0.0/12
admin@APS2100:/# ip access commit</code>
  * save config<code cmd>admin@arbor:/# config write</code>