HP/H3C/Huawei Switch Basic Config

只要是使用 Huawei CLI 介面皆可適用

Basic Config

  • 基本設定(關於 IPv6 的部分請確認 firmware 有支援 v6 設定)
    #
     sysname ChangThisToSwitchName
    #
     dns resolve
     dns server 8.8.8.8
     dns server 8.8.4.4
     dns server ipv6 2001:4860:4860::8888
    #
    ipv6 route-static :: 0 2001:288:FFFF:FFFF::1
    #
    interface Vlan-interface1
     ip address 10.1.1.1 255.255.255.0
     ipv6 address 2001:288:FFFF:FFFF:10:1:1:1/64
    #
     ntp-service unicast-server clock.stdtime.gov.tw
    #
     snmp-agent community read DontUserPublic
     snmp-agent sys-info version v2c
    #
     ssh-server source-interface Vlan-interface1
    #
     telnet-server source-interface Vlan-interface1
    #
     ip route-static 0.0.0.0 0.0.0.0 10.1.1.254 preference 60
    #
  • Static Link-Agregationg
     link-aggregation group 1 mode manual
    interface Ethernet1/0/1
     port link-aggregation group 1
    #
    interface Ethernet1/0/2
     port link-aggregation group 1
    #
hp/switch/basic-config.txt · 上一次變更: 2012/11/01 06:54 由 jal
上一頁 | 下一頁 | 回首頁 | RSS Feed | Facebook