差異處

這裏顯示兩個版本的差異處。

連向這個比對檢視

Both sides previous revision 前次修改
arbor:aps:basic-config [2013/06/11 06:49]
jal [Basic command]
arbor:aps:basic-config [2014/06/23 07:45] (目前版本)
jal New version command change (pravail -> aps)
行 10: 行 10:
   services/ ​       System services   services/ ​       System services
     aaa/             ​Configure authentication,​ authorization,​ and accounting     aaa/             ​Configure authentication,​ authorization,​ and accounting
 +    aps/             ​Configure Pravail APS
     dns/             DNS service configuration     dns/             DNS service configuration
     http/            HTTP service configuration     http/            HTTP service configuration
     logging/ ​        ​Configure logging services     logging/ ​        ​Configure logging services
     ntp/             ​Configure the network time protocol service     ntp/             ​Configure the network time protocol service
-    ​pravail        Configure Pravail+    ​snmp           SNMP service configuration
     ssh/             SSH service configuration     ssh/             SSH service configuration
     telnet/ ​         Telnet service configuration     telnet/ ​         Telnet service configuration
行 21: 行 22:
  
 ===== Basic command ===== ===== Basic command =====
-  * config mgt0 ip<code cmd>​admin@arbor:/#​ip interfaces ifconfig mgt0 10.0.0.1 ​255.255.255.0 ​up</​code>​ +  * config mgt0 ip<code cmd>​admin@arbor:/#​ip interfaces ifconfig mgt0 10.0.0.1/24 up</​code>​ 
-  * show pravail deployment mode<​code cmd>​admin@arbor:/#​ services ​pravail ​mode show</​code>​ +  * show pravail ​aps deployment mode<​code cmd>​admin@arbor:/#​ services ​aps mode show</​code>​ 
-  * set pravail deployment mode<​code cmd>​admin@arbor:/#​ services ​pravail ​mode set inline +  * set pravail deployment mode (active/​inactive)<code cmd>​admin@arbor:/#​ services ​aps mode set active 
-admin@arbor:/#​ services ​pravail ​mode set monitor</​code>​ +admin@arbor:/#​ services ​aps mode set inactive</​code>​ 
-  * show pravail service status<​code cmd>​admin@arbor:/#​ services ​pravail ​show</​code>​+  * show pravail ​aps service status<​code cmd>​admin@arbor:/#​ services ​aps show</​code>​
   * show license<​code cmd>​admin@arbor:/#​ system license show</​code>​   * show license<​code cmd>​admin@arbor:/#​ system license show</​code>​
   * set license(看機器上面的貼紙)<​code cmd>​admin@arbos:/#​ system license set Pravail PRA-APS-2108 AAAAA-AAAA8-AA544-484AA-AAAA8-AAAA6-AAAA3-AAAAA-A1AAA</​code>​   * set license(看機器上面的貼紙)<​code cmd>​admin@arbos:/#​ system license set Pravail PRA-APS-2108 AAAAA-AAAA8-AA544-484AA-AAAA8-AAAA6-AAAA3-AAAAA-A1AAA</​code>​
-  * clear all config<​code cmd>​admin@arbor:/#​ services ​pravail ​database initialize</​code>​+  * clear all config<​code cmd>​admin@arbor:/#​ services ​aps database initialize</​code>​
   * set mgt access list<​code cmd>​admin@arbor:/#​ ip access add https mgt0 172.16.0.0/​12   * set mgt access list<​code cmd>​admin@arbor:/#​ ip access add https mgt0 172.16.0.0/​12
 admin@arbor:/#​ ip access add ssh mgt0 172.16.0.0/​12 admin@arbor:/#​ ip access add ssh mgt0 172.16.0.0/​12