差異處

這裏顯示兩個版本的差異處。

連向這個比對檢視

arbor:aps:upgrade [2014/06/23 08:56] (目前版本)
jal 建立
行 1: 行 1:
 +====== Arbor APS Upgrade Procedure ======
 +Basically, the upgrade firmware step was very similar with Arbor other product.
 +
 +===== Upgrade Procedure =====
 +  * Use WebUI upload file to system disk.
 +    * Administration -> Files -> Upload File
 +    * Upload both arbos & Pravail-APS file.(EX: arbos-5.3-ECZG-i686 & Pravail-APS-5.5.1-ECZG)
 +    * Build code must be same with each other. (5.5.1 = ECZG, 5.5.0 = DKHC, 3.1.2 = DIIG, 3.1.0 = DFYD).
 +  * Check files were uploaded from command<​code cmd>​admin@arbos:/#​ system files directory disk
 +Directory listing of device disk:
 +  Filename ​                                 Kbytes Date/​Time ​  Type
 +  Pravail-APS-5.5.1-ECZG ​                   207548 Jun23  2014 Signed package
 +  arbos-5.3-ECZG-i686 ​                      ​106156 Jun23  2014 Signed package
 +  pravail_ssh_key.pub ​                           1 May26 19:01 Text file
 +  ssh_host.keys ​                                10 May26 19:33 SSH host keys
 +Free space: 1.7G of 2.0G (14% used)</​code>​
 +  * Check system running file<​code cmd>​admin@arbos:/#​ system files show
 + ​Installed packages:
 +  ArbOS_5.3 ​           ArbOS 5.3 system files (build DKHC) (arch i686)
 +  Pravail-APS-5.5 ​     Arbor Networks Pravail APS 5.5 (build DKHC) (arch i686)
 +admin@arbos:/#​ system files uninstall Pravail-APS-5.5</​code>​
 +  * Start Upgrade
 +    - Stop APS Service<​code cmd>​admin@arbos:/#​ services aps stop
 +Stopping Pravail APS services...done.
 +admin@arbos:/#</​code>​
 +    - Uninstall APS (get file name from # system files show)<​code cmd>​admin@arbos:/#​ system files uninstall Pravail-APS-5.5</​code>​
 +    - Install New ArborOS<​code cmd>​admin@arbos:/#​ system files install disk:​arbos-5.3-ECZG-i686
 +Extracting package...done.
 +Changes to ArbOS will take effect after the next reload.</​code>​
 +    - Reboot APS<code cmd>​admin@arbos:/#​ reload
 +  You are about to reboot the system. ​ Do you wish to proceed? [n] y
 +094: Rebooting the system..
 +...............</​code>​
 +    - Install APS (after reboot)<​code cmd>​admin@arbos:/#​ system files install disk:​Pravail-APS-5.5.1-ECZG
 +Extracting package...done.
 +Collecting inventory information..done
 +Upgrading system (this may take some time).done.</​code>​
 +    - Start APS Service<​code cmd>​admin@arbos:/#​ services aps start
 +Starting Pravail APS services...................................done.
 +</​code>​